Complete Home System
Are you concerned about your blood pressure? Does cardiovascular disease run
in your family? You can get clinically accurate blood pressure and heart
rate measurements at home using the DynaPulse 200M Home blood pressure
monitor and your home PC. These readings are stored and displayed on your
home PC, so you can track your blood pressure over time.
The DynaPulse system is easy to use.
No stethoscopes are needed. Just put the cuff on, pump it up, and let the
DynaPulse and your computer do the rest! Even persons with soft heart sounds
or poor hearing can take clinically accurate measurements with the DynaPulse.
The DynaPulse monitor is an affordable, clinical grade instrument.
The DynaPulse Home Monitor is one of the most reliable and accurate blood
pressure monitors for home use on the market. It is one of the very few
electronic blood pressure monitors for home use that is a registered medical
device under FDA 510(k), and exceeds AAMI standards, yet is still affordable.
The DynaPulse system is the only product in the world to display the full
pulse waveform on your computer screen.
The waveform allows you to monitor irregular heartbeats (arrhythmia) by
showing you each individual heartbeat during a measurement. All of the
measurement information can be printed so that you can take them to your
health care provider.
Each DynaPulse 200M Home package is complete with:
- DynaPulse 200M Monitor*
with adjustable air release valve that allows the user to set the
appropriate release rate of 30 +/- 5 seconds from start to end of a
measurement. (*Monitor requires 4 "AAA" batteries)
- Home user Software
- Standard Adult Cuff with Hand Pump, Air Hoses and Connector
The standard adult cuff assembly fits arm circumferences of
10-13.75" (smaller and larger cuffs are available).
- Serial Communications Cable
- Electronic Users Guide and Quick Guide
- One Year Manufacturer's Limited Warranty
Hardware and Software
DynaPulse 200M hardware was designed as a serial communications
device, similar to a serial Mouse, Scanner or Modem for a Personal Computer
(PC), IBM or compatible.
The software is a special application program for blood pressure measurement
and data management, similar to the relationship of a printer's driver
software to the hardware.
DynaPulse software controls the hardware, by initializing and turning on the
Dynapulse monitor's CPU (central processing unit), acquiring data from it
and performing blood pressure calculation, then displaying and storing the
data and calculated information.
All DynaPulse monitors have an adjustable air release valve, a screw or a
knob, that allows user to set the appropriate release rate of 30 +/- 5
seconds from start to end of a measurement. Total measurement time of longer
than 50-60 seconds may give higher systolic reading and/or "Increase High
Range" error message due to the cuff pressure not being able to drop down
below the diastolic point
DynaPulse uses standard clinical grade cuffs recommended by American Heart
Association. Three sizes are available: Standard Adult, Large Adult and
Child Size (for age 5 and above). It is NOT recommended to use DynaPulse on
infants or newborns. Oversized cuff may be purchased from any medical supply
DynaPulse uses single tube cuff identical to a clinical used D-ring cuff. In
any application, please make sure the tube is properly placed and is not
kinked. Non-D ring type cuffs may also work with a DynaPulse unit.
The DynaPulse 200M provides clinically accurate measurements for:
- Systolic Blood Pressure
- Diastolic Blood Pressure
- Mean Arterial Blood Pressure
- Heart Rate
The measurements above are displayed on your PC and stored
to create a Trend Graph, so you can track your blood pressure over time. The
DynaPulse 200M Home monitor will store and track measurements for up to six
Use Back button to return to previous page.