As with the DynaPulse 200M Home system, the 200M Clinical version measures, analyzes and stores clinically accurate blood pressure and heart rate measurements. The Clinical version, however, can track an unlimited number of patients and their data. And the 200M Clinical offers a wide variety of outcome reports. For research purposes, data can also be collected and transmitted to our DynaPulse Analysis Center (DAC) where our automated analysis system extracts up to 18 hemodynamic parameters from each waveform.
The DynaPulse 200M Clinical System can be used in several areas:
Unlike other blood pressure monitors, the DynaPulse 200M serves as a tracking and reporting tool for an unlimited number of patients.
The DynaPulse monitor is an affordable, clinical grade instrument. It is one of the most reliable and accurate blood pressure monitors on the market. It is a registered medical device under FDA 510(k), exceeds AAMI standards, and yet is still very affordable.
As with all Dynapulse monitors, the 200M measures:
Along the lower portion is the Pulse Waveform, which is what you use to detect arrhythmia's and for validation purposes. Once you save the data it will automatically update all the trend information.
The Trend Graph is the first screen that appears when you click on a patient's name. This shows the blood pressure readings for that patient over time.
Visually you and your patient can easily see how their blood pressure is doing over time. Time is shown on the horizontal axis and the measurements are on the vertical axis.
The most important screen is the Trend Analysis. This provides a statistical report based on the Trend Graph. Use the Trend Analysis to document numerically the results of your interventions:
Each DynaPulse 200M Clinical package is complete with:
The DynaPulse 200M monitor is powered by the USB port.
All DynaPulse monitors have an adjustable air release valve, a screw or a knob, that allows user to set the appropriate release rate of 30 +/- 5 seconds from start to end of a measurement. Total measurement time of longer than 50-60 seconds may give higher systolic reading and/or "Increase High Range" error message due to the cuff pressure not being able to drop down below the diastolic point
DynaPulse uses standard clinical grade cuffs recommended by American Heart Association. Three sizes are available: Standard Adult, Large Adult and Child Size (for age 5 and above). It is NOT recommended to use DynaPulse on infants or newborns. Oversized cuff may be purchased from any medical supply houses.
DynaPulse uses a single tube cuff identical to a clinical used D-ring cuff. Non-D ring type cuffs may also work with a DynaPulse unit.